pressure-washing-ops
Quote pressure-washing jobs from surface type and square footage — a documented per-sqft rate table for driveways, siding, decks, and roof soft-wash with minimum charges, so small jobs never price below what the trip is worth. Use when pricing residential exterior-cleaning work on the spot.
$ skillbank install pressure-washing-ops@1.0.0 # pins exactly 1.0.0 · README + changelog included
Pressure Washing Ops
Overview
Pressure-washing quotes go wrong two ways: you eyeball a number and the job eats your afternoon, or a per-sqft rate quotes a $60 driveway that isn't worth loading the truck for. This skill prices from a documented rate table — per-sqft rates by surface type, each with a minimum charge — so the math is consistent job to job and small jobs still pay for the trip.
Everything runs on your own machine. The script does the arithmetic and prints results — nothing is uploaded anywhere.
Installation
1. Copy the pressure-washing-ops/ directory anywhere convenient. 2. Make the script executable (Unix):
chmod +x scripts/quote.py
No pip install needed — standard library only.
Configuration
There is no config file — the rate table is defined at the top of the script so it is always visible next to the math:
| Surface (--surface) | Rate per sqft | Minimum charge | |-----------------------|---------------|----------------| | driveway | $0.15 | $150 | | siding | $0.25 | $200 | | deck | $0.35 | $180 | | roof-softwash | $0.40 | $300 |
Price = max(sqft × rate, minimum). Roof work is soft-wash pricing (no high pressure on shingles) — if the roof genuinely needs pressure washing, that is a different job and a different quote.
Inputs
| Command | Arguments | Returns | |------------|------------------------------------------|----------------------------| | quote.py | --surface S --sqft F | Priced quote for the job. |
Square footage must be positive; an unknown surface or non-positive sqft stops the run with a clear message, not a traceback.
Worked example
A 1,200 sqft two-story siding job (above the minimum):
$ ./scripts/quote.py --surface siding --sqft 1200
Surface House siding (siding)
Area 1200 sqft @ $0.25/sqft = $300.00
Minimum $200.00
QUOTE $300.00
An 800 sqft driveway (below the minimum — the minimum wins):
$ ./scripts/quote.py --surface driveway --sqft 800
Surface Driveway / concrete flatwork (driveway)
Area 800 sqft @ $0.15/sqft = $120.00
Minimum $150.00 <-- minimum applied
QUOTE $150.00
Check the driveway by hand: 800 × $0.15 = $120.00, which is under the $150 minimum, so the quote is $150.00. That minimum is the point of the tool: without it you'd have quoted a number that doesn't cover loading, drive time, and setup.
Playbooks
- Surface prep checklist — what to confirm and protect before the water turns on.
Safety notes
This is a benign business tool. All job inputs stay on your machine; the script makes no network calls and never uploads anything. Quotes are yours to give — the calculator shows the arithmetic behind them. (Actual pressure-washing safety — ladders, electrical, plant protection — is in the prep checklist.)
Version history
Changelog
1.0.0 — 2026-09-27
- Initial release:
scripts/quote.pyquotes pressure-washing jobs from references/surface-prep-checklist.md: pre-job prep checklist.
surface type and square footage against a documented per-sqft rate table (driveway $0.15, siding $0.25, deck $0.35, roof-softwash $0.40) with minimum charges ($150/$200/$180/$300).